How to Install Knobs and Drawer Pulls on Kitchen Cabinets?

A woman’s favorite place in the home is Kitchen. They want to keep it up to date with all the kitchen appliances and accessories. Before or after purchasing the unique cabinet knobs you should know how to install the hardware’s on your drawer. Always remember one thing that buy them according to the color and size of the cabinet and your interiors. If you have traditional plus modern wallpaper, tiles or colors in your kitchen then get the knobs accordingly. Also the knobs come in various finishes and backing options such as silver, silver antique, brass and antique brass.

We will discuss it one by one, as it depends according to the shape and size of the cabinet, knob etc. I will share some unique Cabinet Hardware ideas also.

1. Blue Pottery Mushroom Knobs: Let’s learn how to install on kitchen drawers with 1-inch screw. Each of these knobs comes with a fitted metal attachment. Plus, an installation screw and a washer.

Steps to fix the Knob

• Keep the knob where you need to install it.
• Insert the washer over the installation screw.
• Feed the screw with the washer over the thread from back of the cabinet into the metal attachment of the knob.
• Tighten the screw with screwdriver from the back of the drawer to hold the knob in place.

2. Ceramic Melon Knobs: The shape of this knob is slightly different from the other. These knobs come with the standard sized bolt, all you need is a 4mm hole in the furniture for them to install. These Knobs comes with a bolt, washer, nut and a metal back plate.

Steps to fix the Knob

• Unscrew the nut, remove the washer and the metal back plate from the base of the knob.
• Invert the back plate.
• Slide the threaded bolt into the hole in your drawer
• Feed the washer and nut over the thread from the inside of the drawer. Tighten the nut to secure the knob.

3. How to install the knobs with embedded screw? In this article I will share how you can install the knobs with embedded screw. These knobs come in standard size which will be fit for any kind of furniture or cabinets. It comes only with a washer and a nut.

Steps to fix the Knob

• Unscrew the nut and washer from the base of the knob.
• No use of back plate in this knob.
• Slide the threaded bolt into the hole in your drawer.
• Feed the washer and nut over the thread from the inside of the drawer. Tighten the nut to secure the knob.

4. How to install a Drawer Pull? Drawer Pulls require 2 holes for installation. Parts included are 1 drawer pull with 2 embedded screws and 2 knobs plus 2 nuts, 2 washers and 2 washers and 2 back plates.

Steps to fix the Knob

• Unscrew the nuts, remove the washers and remove the metal back plates from the base of the 2 knobs.
• Invert the back plates.
• Slide the threaded bolt into the 2 holes in your cabinet.
• Feed the washers and nuts over the thread from the inside of the cabinet. Tighten both nuts to secure the handles.

This is how you can install the knobs and the handles in your kitchen cabinets or drawers. All this matters a lot whatever written in this article as it will help you a lot while you are an architect, interiors designer or designing your own kitchen. Well this answer will reduce your time and money too.

• Share on:
• WhatsApp
• Deel
• Tweet
• Pin it
• Messenger
• Email